Футбольные бутсы для игры в зале/на крытом поле Nike HypervenomX Phantom III Academy IC

Футбольные бутсы для игры в зале/на крытом поле Nike HypervenomX Phantom III Academy ICФутбольные бутсы для игры в зале/на крытом поле Nike HypervenomX Phantom III Academy повторяют форму стопы для отличной маневренности и комфорта, а увеличенная зона удара обеспечивает точное касание при игре на улице, на крытом поле и в зале.<br>Футбольные бутсы для игры в зале/на крытом поле Nike HypervenomX Phantom III Academy повторяют форму стопы для отличной маневренности и комфорта, а увеличенная зона удара обеспечивает точное касание при игре на улице, на крытом поле и в зале.


Подробнее >>>







Чернила CACTUS CS-EPT6642, для Epson, 100мл, голубой

Чернила CACTUS CS-EPT6642, для Epson, 100мл, голубойЧернила<br>Чернила для перезаправляемых картриджей. Произведены при строгом соответствии стандартам ISO 9001 и ISO 14001., объем: 100мл<br><br>Цвет: голубойЧернила
Чернила для перезаправляемых картриджей. Произведены при строгом соответствии стандартам ISO 9001 и ISO 14001., объем: 100мл

Цвет: голубой

Подробнее >>>









Майка баскетбольная женская 2K Sport Advance, цвет: светло-зеленый, темно-синий, белый. 130032. Размер XS (40/42)

Майка баскетбольная женская 2K Sport Advance, цвет: светло-зеленый, темно-синий, белый. 130032. Размер XS (40/42)130032_light-green/navy/whiteПрофессиональная баскетбольная игровая майка от 2K Sport создана для того, чтобы вам ничего не мешало демонстрировать великолепную игру на паркете против самых грозных соперников. Полуприлегающий силуэт подчеркивает женственную фигуру и обеспечивает комфорт во время движения. Оригинальные цветовые решения для красивых побед.Профессиональная баскетбольная игровая майка от 2K Sport создана для того, чтобы вам ничего не мешало демонстрировать великолепную игру на паркете против самых грозных соперников. Полуприлегающий силуэт подчеркивает женственную фигуру и обеспечивает комфорт во время движения. Оригинальные цветовые решения для красивых побед.

Подробнее >>>






Ершик для туалета "Brabantia", сменный, цвет: черный. 201240

Ершик для туалета Brabantia, сменный, цвет: черный. 201240201240Устойчивость к коррозии – идеальное решение для ванной или туалетной комнаты.Ершик эстетично спрятан в подставке. Прост в очистке.Изготовленная из пластика щетка легко чистится и имеет длительный срок службы. Превосходно сочетается держателем для туалетной бумаги, мусорными баками и другими изделиями Brabantia.Устойчивость к коррозии – идеальное решение для ванной или туалетной комнаты.Ершик эстетично спрятан в подставке. Прост в очистке.Изготовленная из пластика щетка легко чистится и имеет длительный срок службы. Превосходно сочетается держателем для туалетной бумаги, мусорными баками и другими изделиями Brabantia.

Подробнее >>>







MARIE Стол консольный

MARIE Стол консольныйСтолы<br>MARIE Стол консольный<br>Столы
MARIE Стол консольный


Подробнее >>>










Неттоп ASUS VivoMini VC66-B011Z Intel Core i7 7700(3.6Ghz)/ 4096Mb/500Gb/noDVD/Int:Intel HD/BT/WiFi/war 1y/1.5kg/ black/W10/

Неттоп ASUS VivoMini VC66-B011Z  Intel Core i7 7700(3.6Ghz)/ 4096Mb/500Gb/noDVD/Int:Intel HD/BT/WiFi/war 1y/1.5kg/ black/W10/Платформы<br>Артикул (Part.Number): 90MS00Y1-M00110<br>Тип: Неттоп; Процессор: Intel Core i7 7700; Оперативная память: 4096 Мб; Емкость жесткого диска: 500 Гб; Графический процессор: Intel HD; Bluetooth: Да; Wi-Fi: Да; Цвет: Черный; Операционная система: Winsows 10; Платформы
Артикул (Part.Number): 90MS00Y1-M00110
Тип: Неттоп; Процессор: Intel Core i7 7700; Оперативная память: 4096 Мб; Емкость жесткого диска: 500 Гб; Графический процессор: Intel HD; Bluetooth: Да; Wi-Fi: Да; Цвет: Черный; Операционная система: Winsows 10;

Подробнее >>>







Canni Гель-лак для ногтей Gel Paints, тон № 589, 5 мл

Canni Гель-лак для ногтей Gel Paints, тон № 589, 5 млNLI57Гель-лак Canni – это покрытие для ногтей нового поколения, которое поставит крест на всех известных Вам ранее проблемах и трудностях использования Гель-лаков. Это самые качественные и самые доступные шеллаки на сегодняшний день. Canni Гель-лак может легко сравниться по качеству с продукцией CND, а в цене и вовсе выигрывает у американского бренда. Предельно простое нанесение, способность к самовыравниванию, отличная пигментация, безопасное снятие, безвредность для здоровья ногтей и огромная палитра оттенков – это далеко не все достоинства Гель-лаков Канни.Каждая женщина найдет для себя в них что-то свое, отчего уже никогда не сможет отказаться.Как ухаживать за ногтями: советы эксперта. Статья OZON ГидГель-лак Canni – это покрытие для ногтей нового поколения, которое поставит крест на всех известных Вам ранее проблемах и трудностях использования Гель-лаков. Это самые качественные и самые доступные шеллаки на сегодняшний день. Canni Гель-лак может легко сравниться по качеству с продукцией CND, а в цене и вовсе выигрывает у американского бренда. Предельно простое нанесение, способность к самовыравниванию, отличная пигментация, безопасное снятие, безвредность для здоровья ногтей и огромная палитра оттенков – это далеко не все достоинства Гель-лаков Канни.Каждая женщина найдет для себя в них что-то свое, отчего уже никогда не сможет отказаться.Как ухаживать за ногтями: советы эксперта. Статья OZON Гид

Подробнее >>>


4 Тб Seagate SkyHawk (ST4000VX007)

4 Тб Seagate SkyHawk (ST4000VX007)Жёсткие диски (HDD)<br>SATA 6Gb/s 64Mb 5900rpm<br>Жёсткие диски (HDD)
SATA 6Gb/s 64Mb 5900rpm


Подробнее >>>










F10 Intelligent 3D Pen·? Smart Printing Drawing Pen Speed Control - Blue (EU Plug)

F10 Intelligent 3D Pen·? Smart Printing Drawing Pen Speed Control - Blue (EU Plug) 3D Printer & Supplies<br>Brand: Other<br><br><br><br><br><br> <br> <br>Basic Information<br>  n.g.   45g   <br>  ABS temperature   180-210?  <br>  PLA/WOOD temperature  160-180? <br>  Supported material  1.75mm PLA/WOOD/ABS   <br>  Input rated power for adapter   100/250V 3A   <br>  Output rated power of device  DC12V 3A 36W  <br>  Nozzle   0.4 mm   <br>  Interested groups   Painters, product designers , hobbyists , children, students, etc.   <br>Product Details <br>  Size   170x 20 x25mm   <br>  Weight   48 g   <br> Bundle Accessories <br>1* 3D pen<br>1* Power Adapter<br>1* Pen holder<br>3* 3 meter filament for testing<br> <br><br>Warning!<br>Heat and burn hazard, the tip of the pen can be heated and burn hazard. In Operation or within a short time after stop using, please do not touch the tip or surrounding area. Please warn the others around the operator do not touch the pen due to hazard heating. when not in use or before storing,please unload the material, unplug power socket, put the device in the pen holder, in direct contact, the hot tip of nozzle will damage the painted surfaces, plastic, clothes and etc.<br>The device is suitable for children over 8 years old and adults, children must be accompanied and monitored by adult when using the pen.<br>Warning: Don not use the pen near bathtubs, showers, basins or other places wet with water, this will result in death due to electric shock.<br>Product Overview<br><br><br>Operation rules<br>Step1: plug the power supply<br>Connect the adapter with the power source, then insert the end of the wire of the adapter into the power source hole of the 3D pen, the LED light is yellow, indicates the device is conductive and enter the mode of standby.<br>Step2: material/filament selection<br>Following step1,LED screen displays PLA or ABS, press the material/temperature button for the choice of material, it must be the material used actually, to avoid potential breakdown.(remark: the device can extrude wood filament, working at PLA mode).<br>Step 3: pre-heating<br>After selecting the material, press feeding button, LED light is red, indicates entering pre-heating mode in which LED screen displays real-time heating temperature .when LED turn to green from red, indicating the end of pre-heating process, then you can start to doodle with the pen.(it takes about 30 seconds to pre-heat)<br>Step4: selection of extruding speed<br>Press speed control button to choice best suited extruding speed.(remark: up to 8 speed controls, the default one will be 5 setting, 8 is fastest.processing speed button is only working when stop extruding and LED light is green, in other circumstances the processing will be in vain.<br>Step5: filament loading<br>Insert the selected material into feeding hole at the end of the pen, press feeding button and the filament will be moved by the built-in motor. When the melted material come out of the tip, it means the success of setting, you can start to doodle now.<br>Step6: creating your artwork<br>The device designed with 8 speed controls, please select a proper extruding flow before you doodle. Different color of the same type of filament has different melting points. Please minor adjust the temperature in time according to the extruding status. (relationship between melting point of material and temperature adjustment, please follow temperature minor adjustment statement)<br>Step 7: New extruding flow function<br>The device combines functions of continuous extruding and intermittent extruding. continuous extruding: press feeding button, the pen extrude and flow constantly, press again feeding button, the pen stop feeding, the pen will stop feeding and extruding automatically when continuous feeding is in function for up to 8 minutes. Intermittent extruding: double click feeding button and hold on the button then the pen start to extrude, release the button, extruding stop.<br>Step8: change/unload material<br>When LED light is green, press and hold on the unload button for 3 seconds, then release, built-in motor will start to reverse material. When material stop moving backward, please take out the material gently from the end of the pen, then press unload button, the motor stop reversing.(intermittent function will automatically stop when work up to 1 minute)<br>Step9: finish the works<br>When the drawing ended, please unload all the filament to avoid negative influence on normal use of the device in the future.(remark: the device is sturdy and awesome device, but just like all mechanical tools, it needs a break after one hour of continuous use, to prolong its life span.)<br>Instructions for changing material<br>1.When change into same type of material but in different color, two options with one continuous feeding and the other unload, then load. Whichever option adopted, please be sure of the flat end of filament.<br>2.When change PLA into ABS, first unload material, restart the device(unplug then plug power supply), press material/temperature button enter ABS mode, then load ABS filament. when change ABS into PLA, repeat in the same way.<br>Attention to the end of filament<br><br><br>Surface of end of filament must be flat and the Section of end of the filament must be flat as well, both are better to be vertical with the length direction.<br>Instructions for temperature fine adjustment<br>Due to different melting poit of filament in different color, in order to improve greatly the quality of creation of artworks, please follow below rules:<br>1.In use, when there is a noise of Sputtering, indicates too high temperature,please press material/temperature button to decrease the temperature by 8~15°C.<br>2.Under normal usage, when there is lots of bubble, indicates higher temperature, please press material/temperature button to decrease the temperature by 8~15°C.<br>3.When the extruded material is in dull color and the motor coughs, it indicates lower temperature, please press material/temperature button to increase the temperature by 5~10°C.<br>4.In using PLA material, the extruded material is too thin and runny, it indicates too high temperature, please press material/temperature button to decrease the temperature by 10~15°C.<br>5.The normal extruded material will be smooth, mellow and without bubble(occasional bubble is ok)<br>Troubleshooting<br><br><br>In use, when there are anomalism as under, please follow below instructions for fixing up, if no solution yet, please contact the local distributor.<br> 3D Printer & Supplies
Brand: Other







Basic Information
n.g. 45g
ABS temperature 180-210?
PLA/WOOD temperature 160-180?
Supported material 1.75mm PLA/WOOD/ABS
Input rated power for adapter  100/250V 3A
Output rated power of device DC12V 3A 36W
Nozzle 0.4 mm
Interested groups Painters, product designers , hobbyists , children, students, etc.
Product Details
Size 170x 20 x25mm
Weight 48 g
Bundle Accessories
1* 3D pen
1* Power Adapter
1* Pen holder
3* 3 meter filament for testing


Warning!
Heat and burn hazard, the tip of the pen can be heated and burn hazard. In Operation or within a short time after stop using, please do not touch the tip or surrounding area. Please warn the others around the operator do not touch the pen due to hazard heating. when not in use or before storing,please unload the material, unplug power socket, put the device in the pen holder, in direct contact, the hot tip of nozzle will damage the painted surfaces, plastic, clothes and etc.
The device is suitable for children over 8 years old and adults, children must be accompanied and monitored by adult when using the pen.
Warning: Don not use the pen near bathtubs, showers, basins or other places wet with water, this will result in death due to electric shock.
Product Overview


Operation rules
Step1: plug the power supply
Connect the adapter with the power source, then insert the end of the wire of the adapter into the power source hole of the 3D pen, the LED light is yellow, indicates the device is conductive and enter the mode of standby.
Step2: material/filament selection
Following step1,LED screen displays "PLA" or "ABS", press the "material/temperature button" for the choice of material, it must be the material used actually, to avoid potential breakdown.(remark: the device can extrude wood filament, working at "PLA" mode).
Step 3: pre-heating
After selecting the material, press feeding button, LED light is red, indicates entering pre-heating mode in which LED screen displays real-time heating temperature .when LED turn to green from red, indicating the end of pre-heating process, then you can start to doodle with the pen.(it takes about 30 seconds to pre-heat)
Step4: selection of extruding speed
Press speed control button to choice best suited extruding speed.(remark: up to 8 speed controls, the default one will be 5 setting, 8 is fastest.processing speed button is only working when stop extruding and LED light is green, in other circumstances the processing will be in vain.
Step5: filament loading
Insert the selected material into feeding hole at the end of the pen, press feeding button and the filament will be moved by the built-in motor. When the melted material come out of the tip, it means the success of setting, you can start to doodle now.
Step6: creating your artwork
The device designed with 8 speed controls, please select a proper extruding flow before you doodle. Different color of the same type of filament has different melting points. Please minor adjust the temperature in time according to the extruding status. (relationship between melting point of material and temperature adjustment, please follow" temperature minor adjustment statement")
Step 7: New extruding flow function
The device combines functions of continuous extruding and intermittent extruding. continuous extruding: press feeding button, the pen extrude and flow constantly, press again feeding button, the pen stop feeding, the pen will stop feeding and extruding automatically when continuous feeding is in function for up to 8 minutes. Intermittent extruding: double click feeding button and hold on the button then the pen start to extrude, release the button, extruding stop.
Step8: change/unload material
When LED light is green, press and hold on the unload button for 3 seconds, then release, built-in motor will start to reverse material. When material stop moving backward, please take out the material gently from the end of the pen, then press unload button, the motor stop reversing.(intermittent function will automatically stop when work up to 1 minute)
Step9: finish the works
When the drawing ended, please unload all the filament to avoid negative influence on normal use of the device in the future.(remark: the device is sturdy and awesome device, but just like all mechanical tools, it needs a break after one hour of continuous use, to prolong its life span.)
Instructions for changing material
1.When change into same type of material but in different color, two options with one "continuous feeding" and the other "unload, then load". Whichever option adopted, please be sure of the flat end of filament.
2.When change PLA into ABS, first unload material, restart the device(unplug then plug power supply), press material/temperature button enter ABS mode, then load ABS filament. when change ABS into PLA, repeat in the same way.
Attention to the end of filament


Surface of end of filament must be flat and the Section of end of the filament must be flat as well, both are better to be vertical with the length direction.
Instructions for temperature fine adjustment
Due to different melting poit of filament in different color, in order to improve greatly the quality of creation of artworks, please follow below rules:
1.In use, when there is a noise of Sputtering, indicates too high temperature,please press material/temperature button to decrease the temperature by 8~15°C.
2.Under normal usage, when there is lots of bubble, indicates higher temperature, please press material/temperature button to decrease the temperature by 8~15°C.
3.When the extruded material is in dull color and the motor coughs, it indicates lower temperature, please press material/temperature button to increase the temperature by 5~10°C.
4.In using PLA material, the extruded material is too thin and runny, it indicates too high temperature, please press material/temperature button to decrease the temperature by 10~15°C.
5.The normal extruded material will be smooth, mellow and without bubble(occasional bubble is ok)
Troubleshooting


In use, when there are anomalism as under, please follow below instructions for fixing up, if no solution yet, please contact the local distributor.


Подробнее >>>